Pneumatic fluorine butterfly valve
Valve type:D671X/F D641X/F
Way of connection:Clamp type, flange type, etc
Nominal pressure:1.0~1.6MPa
Body material:Cast steel, stainless steel, etc
Suitable temperature:PTFE/PO/FEP≤120℃
Main Performance Parameters
Technical parameters of the configured pneumatic actuator | Main technical parameters of valve body | ||
Cylinder type | GT series, AT series, AW series | Valve type | Middle line fluorine butterfly valve |
Work way | Double acting piston type, single acting spring return type | Valve type | D671F46/F4 D641F46/F4 Etc |
Air pressure | 4~8Bar | Connection mode | Clamp type, flange type, etc |
Working medium | Dry and clean without corrosive gas | Nominal diameter | DN 50～400mm |
Working temperature | Room temperature type: - 20 ℃ to 80 ℃ (nitrile rubber O-rings) | Nominal pressure | 1.0~1.6MPa |
High temperature type: - 20 ℃ to 160℃ (fluorine rubber O-rings) | Body material | Cast steel, stainless steel, etc | |
Range of motion | 0~90°±5° | Butterfly material | WCB+PTFE/PO/FEP |
Interface thread | GT52~GT83 G1/8" | Seat tightness | PTFE/PO/FEP Etc |
GT110~GT210 AT52~AT210 G1/4" | Suitable temperature | PTFE/PO/FEP≤120℃ | |
Valve position signal | Locator: 4~20mA/reply: full ON/OFF signal | Applicable medium | Water, steam, oil corrosion and the corrosion medium, etc |
DONGGUAN JINYING VALVE AUTOMATION TECHNOLOGY CO., LTD.
Add：No.7, Xinyuanheng 2nd Road, Guancheng District, Dongguan Tel： +86 0769-22303021 Phone：+86 13829158155 E-mail：13829158155@qq.com Site：inpil.cn |
|
